尋找中美洲 / 台灣產品
Fire Alarm Control Panel
Introduction
Detailed Product Description
1) Conventional Fire Alarm Control Panel
2) Support 5~100 zones selection...
3) 24 Volt Operated fire detection system
Feature:
All the base plates adopt a modular design, with stable circuits,
simplified and elegant appearance, easy for users to operate
and maintain.
■Accumulation Function: Warning will not take place until
circuit detection is confirmed after an accumulated period
of time, so as to reduce the interference and reporting
mistakes of ordinary circuits and enhance the reliability
of the mainframe.
■Automatic Circuit Detection: Digit-counting scanning is
adopted for circuit detection to ensure normal operation
of each circuit. (Optional Type)
■Reserve Power Supply Protective Device: In case of power
failure, discharge of the reserve battery will automatically
stop when it is below DC18V, so as to extend its service
life.。
■Overall Configuration: External lines are led into the terminal
distributing board through slots, and is separated from the
circuit board, which can be replaced without removing
external lines, easy and fast to maintain.
Specification:
Power Supply (AC) : AC 110V 50/60 Hz ∕ 220V 50/60 Hz
Reserve Power Supply : DC24V
Charging Voltage & Current : DC 26V below 450mA
Loop Voltage & Current : DC 24V
short-circuit voltage; below 5V 32mA
Loop External Line lmpedance:
Two-way below 50Ω
Detector Setting : Differential constant
temperature smoke detector
(DC24V 80μA); No more than 18 smoke detectors each L
Terminal Resistance : 10KΩ
Number of Indicator Lights : 1.3 times of disk circuit
Number of Local Rings : 1.3 times of disk circuit
Body Material : 1.2m/m--~2.0m/m standard material
Main Loudspeaker : Double-sound BUZZER, above92dB
Reporting Contact : No-voltage Normal Open contact; Capacity AV1 50V7A
Controller of Roller Shutter
Door : 140V~220V in common use
Tel+886-2-29468198
E-Mail dafamary@yahoo.com.tw
Website http://