尋找中美洲 / 台灣產品

4port 10/100/1000Base-T Green Gigabit Ethernet IP Managed Fiber Switch

Introduction MLS-1O4G-S-MA Green Network Managed Fiber Switch
1.Built-in energy-saving Green Network technology
2. L2 Manager Fiber Switch for FTTx CPE Application
3. Smart Link for Fiber Speed Selection
4port 10/100/1000Base-T Green Gigabit Ethernet IP Manager Fiber Switch
Description
The MLS-1O4G Series Provides three advantages and integration to an stand-alone optical fiber Network Manager switch for 4 x 10/100/1000Base-T. This Fiber Manager Switch with its idea functions Smart Link ability of selecting either 100Base-FX or 1000Base-X on the fiber port, using the SFP module. With this converter the FTTx networks can grow from today’s need of 100Mbps to tomorrow’s need of 1Gbps – without the need of physically upgrading the converter. Simply exchange the 100 Mbps SFP in the access node switch with a 1Gbps SFP (the access node switch must of course support Gbps speed). The converter will then automatically select the higher speed – and you now have a full featured Gbps network all the way to the end-user.
Features
*Power Saving Up to 60%.
*Layer II feature for IP remote manager meet the FTTx application.
*Smart Link converter that supports both 100Mbps and 1Gbps on the fiber port for using SFP module.
*Operates in store and forward mode.
*MDI/MDIX auto-crossover for TP ports.
*Auto-negotiation (10/100/1000 Mb/s) for TP ports.
*Maximum packet size: 9216 Bytes.
*Support TP port RJ45 Cable Diagnostic function and get Cable Length/Status.
Specifications
LAN Interface Specification
Four RJ-45 female connector for straight or cross-over connection.
Supports 10/100/1000Base-TX, n-way (Auto-Negotiation).
Supports Full, Half duplex, 10/100/1000 speed Auto mode selections (1000M only support Full duplex mode).
Transmission Packet Rate for 10/100Base-TX: 14880/148800 per second ; 1000Base-T: 1488000 per second
Copper TP cable 4 pair Cat. 5e or 6 UTP

Optical Interface Specification
Transceiver type: SFP type socket
Supports 155 Mbps and 1.25 Gbps for multi-rate speed

General Specification
Operate in store and forward mode
Support IEEE802.3 10BASE-TX
Support IEEE802.3u 100BASE-TX
Support IEEE802.3ab 1000BASE-T
Support IEEE802.3x 100BASE-FX(100Mbps)
Support IEEE802.3z 1000BASE-FX(1000Mbps)
Support 8K MAC address
Support Auto MDI / MDIX
Support 9K Jumbo Frame
Support TP Port Auto-negotiation(10/100/1000 Base and Full/ Half mode)
Support Fx Port Auto-negotiation(100/1000 Base-FX ,Full duplex mode Only)
Temperature: 0 - 50℃ (Operating); 0 - 70℃ (Storage).
Humidity: 20-80% non-condensing (Operating); 10-90% (Storage).
Power: DC Jack : Switching adaptor (12V, 0.5A); Power consumption: < 5W
Dimensions: 155mm(W) x 83mm(D) x 30mm (H).
Weight: TBD
Compliance: FCC part15 Class B, CE Mark
MTBF: 65,000 h (25℃)

Layer II Manger Switch feature Description:
Support Web SNMP Manager feature
Support 802.1Q/QoS priority/ port setting
Support Q in Q double VLAN tagging
Support IGMP v1/v2 snooping
Support Port Trunk setting
Support LAN Loop Prevention
Support Port Mirroring
Support port rate limiting from 8K to 1Gbps (step 8K base for Ingress/Egress per port)
Support 9216 Jumbo Frame
Support Green Ethernet
Support 802.3az EEE function
Support Auto Provision
Support Port Statistics Monitor
Support Port Cable Diagnostic
Support Firmware Upgrade and configuration backup
Support Manager VLAN tagging

Company Medium Link System Technology CO., LTD.

Tel886-2-29304290

E-Mail more_info@mlinksys.com

Website mediumlink.diytrade.com

Related Products