中美洲自由貿易協定產品網

Fire Alarm Control Panel

Detailed Product Description


1) Conventional Fire Alarm Control Panel
2) Support 5~100 zones selection...
3) 24 Volt Operated fire detection system

Feature：
All the base plates adopt a modular design, with stable circuits,

simplified and elegant appearance, easy for users to operate

and maintain.

■Accumulation Function: Warning will not take place until

circuit detection is confirmed after an accumulated period

of time, so as to reduce the interference and reporting

mistakes of ordinary circuits and enhance the reliability

of the mainframe.

■Automatic Circuit Detection: Digit-counting scanning is

adopted for circuit detection to ensure normal operation

of each circuit. (Optional Type)

■Reserve Power Supply Protective Device: In case of power

failure, discharge of the reserve battery will automatically

stop when it is below DC18V, so as to extend its service

life.。

■Overall Configuration: External lines are led into the terminal

distributing board through slots, and is separated from the

circuit board, which can be replaced without removing

external lines, easy and fast to maintain.


Specification:

Power Supply (AC) : AC 110V 50/60 Hz ∕ 220V 50/60 Hz

Reserve Power Supply : DC24V

Charging Voltage & Current : DC 26V below 450mA

Loop Voltage & Current : DC 24V

short-circuit voltage; below 5V 32mA

Loop External Line lmpedance:
Two-way below 50Ω

Detector Setting : Differential constant
temperature smoke detector
(DC24V 80μA); No more than 18 smoke detectors each L

Terminal Resistance : 10KΩ

Number of Indicator Lights : 1.3 times of disk circuit

Number of Local Rings : 1.3 times of disk circuit

Body Material : 1.2m/m--~2.0m/m standard material

Main Loudspeaker : Double-sound BUZZER, above92dB

Reporting Contact : No-voltage Normal Open contact; Capacity AV1 50V7A

Controller of Roller Shutter
Door : 140V~220V in common use

ISO 9001:2000

MADE IN TAIWAN

+886-2-29468198

+886-2-29480620