中美洲自由貿易協定產品網

DC/AC Tandem Welding Gantry

DC/AC TANDEM WELDING GANTRY
Model: TWG-4015(H)
ADVANTAGE KINGARC
 High performance--- this AC-DC submerged arc requires only the electrical supply lines connected to begin production welding process.
 Energy saving---Increase arc performance by employing multiple arcs with mechanized electrode positioning and automatic weld controls
 Cost saving---The unique torch guidance system assures accurate weld orientation without costly tracking systems
 Remote-controlled movable carriages with adjustable torches
 High efficiency--The gantry is a motorized structure that travels on rails and is equipped with all necessary equipment for the welding operation
 Automated welding machine used to weld flange and web profiles together to form various beam configurations
 Flux auto-recycling system ----provides automatic dispensing, removal and recycling of flux
 This is available for pail –packed wire(250/300)---decreasing the frequency of wire replacement and thus increasing welding efficiency

SPECIFICATIONS
 Power supply 3 Phase /380V/50HZ
 Driving system Double DC drive motor and control by only one DC-controller
 Travel speed 100 – 5500mm/mim
 The distance of the both rail: 4000mm
 Height of Web: 300 – 1200mm (2 H-Beam in one time),MAX1600mm(only one Beam)
 Thickness of Web: MIN 6mm
 Material: carbon steel and high tension steel (according to the flux and wire
 Welding position: Flat
 Length of travel: 15000 mm
 Diameter of wire: 3.2mm-4.8mm (300kgs)
 Vertical axle for welding up/down, left/right by AC drive motor
 Vertical working range: 400 – 1400mm
 Horizontal working range: 400 – 1400mm
 Light device: 1Set
 H-Beam welding device: 2 Set

WELDING EQUIPMENT
1. Lincoln DC-1500 DC power source (3 Phase 380/440V 50/60 Hz)-- 2SET
2. Lincoln NA-3 wire feeder & controller -- 2SET
3. Lincoln AC-1200 AC power source (1 phase 380V/50 Hz)-- 2SET
4. Lincoln NA-4 wire feeder & controller -- 2SET
5. Lincoln K219 Flux hopper -- 2SET
6. Welding cable and cable car Device(Length:15M)--4SET
7. Ground cable (10M)-- 4SET

FLUX RECOVERY SYSTEM
1. Hitachi 2.5 HP BLOWER -- 2SET
2. Primary Separator Tank & Cone Bucket -- 2SET
3. Recovery hose -- 2SET

CONTROL SYSTEM
 Gantry For/Rev,
 Travel speed stepless adjustment
 Vertical axle Up/Down, Right/Left
 Welding Start/Stop,Man/Auto
 Recovery system Start/Stop
 Flux Hopper ON/OFF
 DC/AC start/stop weld

Optional Equipment
1. Conveyor
2. Rail
3. Wire pail device

886-3-3502467

886-3-3506730